GREAT PLAINS NTA3007HD, Operator'S Manual

Page: 71 / 178

NTA907HD and NTA3007HD Table of Contents Index Operating Instructions
Great Plains | 166-207M | 02/26/2019 Table of Contents Index 65
Refer to Figure 71
6. Deploy auger (page 49).
7. Swing inlet hopper under rear meter.
(see page 64 for additional steps if unloading front
hopper)
8. Position collection bin or vehicle under auger outlet.
9. Install the calibration crank (page 56).
Refer to Figure 71
10. Open (front) Calibration door . A small amount of
seed may fall into auger inlet hopper.
Do not open (rear) Clean-Out Door before auger
is operating, or material may flow in large volume and
overflow auger inlet hopper.
11. Check that auger controls are at center/off.
Figure 71
Unload Rear Hopper with Auger
29409
4
RE-IMPORT
AS ISO#
32393
Figure 72
Open Calibration Door
26401
2
1
1
2