GREAT PLAINS NTA2007HD, Operator'S Manual

Page: 64 / 178

60
Great Plains Manufacturing, Inc.
Contents Index NTA607/2007HD
166-283M
Contents Index
04/09/2019
Field Operations
Final Field Checklists
Use the following tables to develop a final checklist for
your tractor/air drill configuration.
Additional or fewer steps may be necessary depending
on tractor features, air drill options and planting accesso-
ries.
Null4.aac:
Null4:
Null4:
Null4:
Null4:
Null4:
Null4:
Null4:
Mechanical Checklist Page
Check all tire pressures 149
Tongue height preset 26
Implement unfolded 30
Marker extension set 97
Marker disk angle set 98
Check ladders stowed. 42
Electrical Checklist Page
Verify electrical hookups solid 26
Check seed monitor terminal and observe
any diagnostic messages
a
Configure monitor for crop and population a
a. Refer to DICKEY-john
®
Air Cart Control manual.
Hopper and Air System Checklist Page
Meter doors closed 46
Manifold to hopper seal
Materials loaded
47
Hose routings - no sags, no pinches (check
wing-folded & field positions)
-
Hoses fully connected to meters, towers
and openers
-
Frame Mounted Coulter Checklist Page
Coulter blade wear 89
Coulter to row alignment 89
Coulter down-force 90
Row Units Checklist Page
Preset depth handles alike. 95
Preset down force springs alike, except in
tracks.
92
Check wheel scraper gaps (if installed) 93
Hydraulic System Checklist Page
Check tractor hydraulic reservoir full -
Inspect connections for leaks -
Perform a raise and lower operation 35
Set fan shut-off valve ON 58
Check fan operation 56
Meters and Drive Checklist Page
Unused meter disabled by removing gear 71
Correct DRIVER/DRIVEN rate Range
gears installed on meter(s) in use
71
Correct optional flutes for rate Range a
Variable rate gearbox set per calibration 72
Check contact tire inflation 149
Check chain tension. Re-connect any
loose idler tensioning springs.
151
Master Switch ON
(Variable Rate Kit option)
29
a. Refer to Seed Rate manual.