4/25/19
195-144M
3S-3000
Setup
32
Refer to Figure 40 and Figure 41
3.
To align the clutch jaws (1) vertically, loosen the two
5
16
-inch bolts (5) at the bottom of the breakaway
clutch bracket (6), and adjust the bracket as needed.
4.
To adjust clutch jaws for full jaw contact, loosen the
two
5
16
-inch carriage bolts (8) and slide breakaway
clutch bracket (9) until jaws on the fixed half of clutch
make full contact with jaws on spring loaded half of
clutch without compressing clutch spring.
The two
7
8
-inch hex shafts (7) should have
1
8
inch
(3.2mm) gap (2) between them when the clutch jaws
have full contact.
Figure 40
Transfer Drive Shaft Gap
18955
Figure 41
Transfer Drive Shaft Vertical and Left-Right Adjustment
15621
6
5
7
8
9
Summary of Contents for 3S-3000 Series
