manualshive.com logo in svg

GREAT PLAINS 3P1006NT-1575, Operator'S Manual, Page: 61 / 80

Share
Download
GREAT PLAINS 3P1006NT-1575 Operator'S Manual Download Page 61

3P1006NT

Table of Contents

Index

Options

Great Plains | 151-144U | 2019/03/14

55

Options

Agitator for Main Seed Box

An optional agitator can be added to the main seed
box. It stirs the seed directly above the metering
cups, separating soybeans that are sticky, and helps
prevent bridging of light, fluffy seeds (this is not a
substitute for the optional native grass seed box).

If the drill has only a main seed box, or has dual seed
or native grass as the only optional box, order the
“W/DRIVE” kit to get the necessary accessory drive
components.

If the drill has fertilizer or small seeds, or any
combination of, order the “W/O DRIVE” kit.

Press Wheel Selection

The base drill includes a choice of press wheels.
Additional wheels are available, and all may be
field-installed.

This manual does not list kit part numbers as the
available wheels are region-specific. Consult your
dealer.

Coulter Blades

The standard coulter blades on the 3P1006NT drill
are 43.2 cm 820-156C turbo or 820-018C fluted.

Available replacement and alternate blades include:

Feed Cup Plug

The feed cup plug stops seed flow from the main box
or dual seed box above the meter. Order one per row.

See the Material Rate Manual for instructions.

Description

Part Number

3P1006NT AGITATOR KIT W/DRIVE

118-970A

3P1006NT AGITATOR KIT W/O DRIVE

118-971A

12682

Description

Part Number

1

COULTER BLADE FLUTED

820-018C

2

17 COULTER BLADE 3/4 WAVY

820-082C

3

17 COULTER BLADE 5/8 WAVY

820-116C

4

5/8 WAVY TURBO BLADE

820-156C

Description

Part Number

1 3/4 WIDE FEEDER CUP PLUG

817-087C

28383

1

2

3

4

26279

Summary of Contents for 3P1006NT-1575

















































































Reviews:

No comments