Great Plains
| 195-440M | 2019-05-03
60
2S-2600/F/HD/HDF
Adjustments
Disk Scraper Adjustments
Disk scrapers are optional. See page 93 ordering
information and page 23 for installation. To keep opener
disks turning freely, dirt scrapers are mounted between
disks to clean as disks rotate.
As field conditions vary, scrapers may need to be
adjusted. In damp conditions, lower scrapers. If openers
are not turning freely, raise scrapers. To adjust, loosen
bolt and move scraper as needed.
Sharp Object Hazard:
Row unit disk blades may be sharp. Use caution when making
adjustments in this area.
Seed Firmer Adjustments
00 and 00HD Series row units include a seed flap, and
accept one of two optional seed firmers.
The seed flap requires no adjustment, but may need to
be replaced if worn, and may need to be shortened if an
optional seed firmer is added after initial delivery.
Sharp Object Hazard:
Row unit disk blades may be sharp. Use caution when making
adjustments in this area. To adjust the Keeton Seed Firmer,
lower the drill until the disks of the row units are resting on the
ground.
Keeton Seed Firmer Adjustment
The optional Keeton Seed Firmer is an engineered
polymer shape that slides down the seed trench. It traps
seeds as they exit the seed tube and firms them into the
bottom of the “V”.
The Firmer is provided with a preset tension which is
recommended for using the first year. The tension screw
can be tightened in subsequent years according to
your needs. Firmers should provide just enough tension
to push seeds to the bottom of the trench.
Figure 63
Opener Disk Scraper
26463
Figure 64
Keeton Seed Firmer
26443
1
1
