Jaguar II User Manual
5. Maintenance
This chapter explains the basic maintenance (i.e. cleaning the cutting plotter) required for the
cutting plotter. Except for the below mentioned, all other maintenance must be performed by a
qualified service technician.
5.1 Cleaning the Cutting Plotter
In order to keep the cutting plotter under good condition and best performance, you need to
clean the machine properly and regularly.
Cleaning Precaution !
Unplug the cutting plotter before cleaning in
order to prevent electrical shock.
Never use solvents, abrasive cleaners or strong
detergents for cleaning. They may damage the
surface of the cutting plotter and the moving
parts.
Recommended Methods:
Gently wipe the cutting plotter surface with a lint-free cloth. If necessary, clean with a
damp cloth or an alcohol-immersed cloth. Wipe with water to rinse off any residue and dry
with a soft, lint-free cloth.
Wipe all dust and dirt from the tool carriage rails.
Use a vacuum cleaner to empty any accumulated dirt and media residue beneath the pinch
roller housing.
Clean the platen, paper sensors and pinch rollers with a damp cloth or an alcohol-immersed
cloth, and dry with a soft, lint-free cloth.
Wipe dust and dirt from the stand.
Basic Maintenance 5-1
