Setup Instructions
1.
Locate key taped to
Home Power Hockey Table
playing surface.
2.
Open trap door on the bottom of the
H.P.H. Table
.
3.
Remove 4 legs with levelers and a bag of (16) bolts attached to the inside of the trap
door.
4.
Attach legs to bottom of table using (16) 1 1/4” x 3/8” #16 bolts. (See Figure 1)
5.
Stand
table
upright.
6.
Open
Power Supply Access Door
(see Figure 2).
7.
Locate bag stapled to door contain
ing (4) 1/4” #20 bolts.
8.
Using those bolts, attach
Score Panel
to side of table with taped wire.
9
. Connect Wire from table to connector marked “Interface” on the back of the
Score
Panel
.
NOTE:
Make sure the notch on the wire harness faces the center of the circuit board.
Front View of
Home Power Hockey Table
FIGURE 1
1 1/4” x 3/8” #16 Bolt
Trap Door
for legs
(on bottom of table)
Puck Drop Access Door
Legs
Wire from table
Score Panel
1/4” #20 bolts
Locks
