a) Lock Tab (24)s -Check that the Lock Tabs (24) are not
warped. They should be straight and aligned with the unit's
body.
b) Intake Valves (23) - Check that the Intake Valve Flaps on
the underside of your unit (in the Bottom Lid ) move freely
to open and close. Clean Flaps if necessary.
6. Remote control (optional) does not operate properly:
7. Debris Comes Out Of The Aquabot When
Removing It From Pool
(Bottom Lid Does Not Close Properly)
a) Check the battery in the Remote Control Transmitter (25),
replace if necessary.
b) Make sure that you activate the RC System (25) no more
than 30 meters away from the Transformer, pointing the
control box to the antenna.
c) If there is still a problem with the RC System (25), call your
service center for assistance.
Place the Robot on the ground and
unplug the cable from the transformer.
With one hand, holding the E-Z Swivel,
walk away from the Robot, pulling the
cable to its full length.
The core will rotate inside the cover
and in this way will untangle the cable.
Holding with one hand the E-Z Swivel.
CABLE CARE
If the problem persists,
use the E-Z Swivel device.
The cable may become twisted after a period of time in use. To correct
this condition, simply lock the moveable handle on the top of the cleaner
in the opposite diagonal direction. The pool cleaner will now travel in the
opposite direction while cleaning your pool and the cable will uncoil.
Check the cable periodically for external damage.
patent pending
8. The cable is twisted:
a) Reverse the diagonal position of the handle.
b) Use the E-Z swivel as shown bellow.
9
Summary of Contents for Evolution AR208201
Page 1: ......