GRAVOGRAPH L-Solution 700, User Manual, Page: 13 / 104

First contact L-SOLUTION 800 machine . 13
Description
The L-SOLUTION machine is a LASER engraving machine.
It has a control panel with a L.C.D. screen connected to the software in the machine.
Files to be engraved are transferred from the computer to the machine via a cable which is plugged into one of the two ports
on the L-SOLUTION machine.
The actual engraving process is controlled by a LASER.
The object to be engraved is placed on a table (as standard) or held by any other system recommended by GRAVOGRAPH
(consult your GRAVOGRAPH dealer for more information on systems available).
The L-SOLUTION machine has a maximum engraving surface area of:
- 12" x 12" (305 x 305 mm) (L-SOLUTION 700).
- 24" x 12" (610 x 305 mm) (L-SOLUTION 800).
- 24" x 24" (610 x 610 mm) (L-SOLUTION 900).
The L-SOLUTION LASER engraving machine is a high performance machine: All safety
instructions must be complied with.
Front view of the machine
The machine must always be switched off before connecting or
disconnecting a cable or the cylinder attachment (optional
accessory), as indicated on label(N5).
LASER engraving machine
(diagram 1)
H. Base
K. Engraving table
L. Main stop button
B. Control panel
B1. L.C.D. screen
B2. 12-key control keyboard
B3. 2 indicator lights (red and green)
M. Air-assist adjustment button
J1. Head
J2. Thread columns for the rise-lower moving
J3. Graduated X-ruler
J4. Graduated Y-ruler
J5. X-Rail
J6. Y-Rails
N9. Cylinder attachment connection (optional accessory)
Description
L-SOLUTION
800