GrIP User’s Guide
Chapter 5 – GrIP Software
GKLOAD
GKLOAD is a DOS command-line utility for loading GrIPKey sets. While
the GrIPKey software requires Windows 95, the GKLOAD utility allows
you to configure your GrIP controller with a GrIPKey set from a DOS
command prompt. That means that you can use your GrIP controller to
play any keyboard-controlled DOS game.
To load a GrIPKey set into your GrIP controller using
GKLOAD:
1.
In DOS, change to your \GRAVIS\GRIP directory.
2.
Type: GKLOAD [setname] <Enter>
(where “setname” is the name of a GrIPKey set)
If you return to Windows 95 after using GKLOAD, you must disable
keyboard emulation using GCC or GrIPKey.
Important!
Any time you
use keyboard emulation
(whether you enable it from
GrIPKey, GKLOAD, or GCC) in
order to use the your GrIP
controller’s directional pad (D-
pad), you must use a GrIPKey
set that has the game’s
keyboard commands for
direction control mapped to
the D-pad, and you must
select “Keyboard only”
control in the game.
