GB – 3
NOTE:
To locate your nearest Ariens Dealer, go to
www.ariens.com on the internet. To locate your nearest
Gravely Dealer, go to www.gravely.com on the internet.
2. Understand all Safety Precautions provided in the
manuals.
3. Review control functions and operation of the unit.
Do not operate unit unless all controls function as
described in this manual.
4. Review recommended lubrication, maintenance
and adjustments.
5. Fill out a Product Registration Card and return the
card to the Ariens Company or go to
www.ariens.com or www.gravely.com.
SAFETY ALERTS
Look for these symbols to point out
important safety precautions. They mean:
Attention!
Personal Safety Is Involved!
Become Alert!
Obey The Message!
The safety alert symbols above and signal words below
are used on decals and in this manual.
Read and understand all safety messages.
NOTATIONS
NOTE:
General reference information for proper
operation and maintenance practices.
IMPORTANT:
Specific procedures or information
required to prevent damage to unit or attachment.
PRACTICES AND LAWS
Practice usual and customary safe working precautions,
for the benefit of yourself and others. Understand and
follow all safety messages. Be alert to unsafe conditions
and the possibility of minor, moderate, or serious injury or
death. Learn applicable rules and laws in your area.
Always follow the practices set forth in this manual.
REQUIRED OPERATOR TRAINING
Original purchaser of this unit was instructed by the seller
on safe and proper operation. If unit is to be used by
someone other than original purchaser; loaned, rented or
sold, ALWAYS provide this manual and any needed
safety training before operation.
1. WARNING!
2. DANGER!
WARNING:
Improper assembly or adjustments
can cause serious injury.
SAFETY
DANGER:
IMMINENTLY HAZARDOUS
SITUATION! If not avoided, WILL RESULT in
death or serious injury.
WARNING:
POTENTIALLY HAZARDOUS
SITUATION! If not avoided, COULD RESULT in
death or serious injury.
CAUTION:
POTENTIALLY HAZARDOUS
SITUATION! If not avoided, MAY RESULT in
minor or moderate injury. It may also be used to
alert against unsafe practices.
Stop engine and wait for all moving parts to
stop before opening cover.
Avoid tip over and loss of control:
DO NOT overload bagger.
Use extreme caution on slopes.
DO NOT make abrupt turns or speed
changes.
•
Weight kit is required when using bagger.
•
Be aware of new turning radius.
Always keep feet and hands away from
rotating parts.
Never direct discharge towards persons or
property that may be injured or damaged by
thrown objects.
Keep people away from unit while
operating.
Shut off engine, remove key, and read
manual before you adjust or repair unit.
NO STEP! Always keep feet away from
rotating parts.
OTt2080
OTt2070
OL3030
OL0910
OL4140
OL4010
OL4420
Summary of Contents for Zoom XL Bagger
Page 23: ...GB 23 NOTES...
Page 35: ......
