GB - 9
Mower Deck Controls
MX20093
A-Mower Deck Lift Levers
B-Height-of-Cut (HOC) Pin
Miscellaneous Controls
MX20094
A-Free-Wheeling Valves
Mounting and Dismounting Machine Safely
MX20095
1. Step on operator’s platform (A) at the rear of machine to mount
the machine.
2. Park machine safely. (See Parking Safely in the SAFETY
section.)
3. Step off operator’s platform to dismount machine.
4. Keep operator’s platform and suspension springs clean and
free of debris.
Raising and Lowering Thigh Pad
1. Park machine safely. (See Parking Safely in the SAFETY
section.)
MX20096
2. Raise and lower thigh pad (A) as required.
Floating Deck Models
Adjusting Mower Deck Cutting Height
The mower deck height adjustment consists of seven different
cutting heights. The cutting heights range from 38-114 mm
(1-1/2-4-1/2 in.) in 13 mm (1/2 in.) increments.
1. Park machine safely. (See Parking Safely in the SAFETY
section.)
2. Disengage PTO.
3. Stop engine and lock park brake.
MX20099
4. Remove retaining ring (A) from HOC pin (B).
5. Push down on deck lift lever (C).
6. Remove HOC pin.
7. Place HOC pin in desired height hole (D).
8. Release deck lift lever (C).
9. Install retaining ring (A) in HOC pin (B).
10. Repeat procedure for opposite side.
CAUTION: Avoid injury! Before adjusting cutting height,
stop engine and lock the park brake.
