Gravely Pro-Stance 99410000-1948FL Owner'S/Operator'S Manual Download Page 42

Ariens Company • 655 W. Ryan St, P.O. Box 157 • Brillion, WI 54110-0157• (920) 756-2141 • www.ariens.com

ALW2 - 5407

Ariens Limited 

Warranties

2-Year Limited Lawn and Garden 
Consumer Warranty

Ariens Company (Ariens) warrants to the original 
purchaser
 that Ariens and Gravely brand consumer 
products manufactured by Ariens Company will be free from 
defects in material and workmanship for a period of two (2) 
years after the date of purchase, and that Ariens will repair 
any defect in material or workmanship, and repair or replace 
any defective part, subject to the conditions, limitations and 
exclusions set forth herein. Such repair or replacement will 
be free of charge to the original purchaser (labor and 
parts), except as noted below.

The two-year duration of this warranty applies only if the 
product is put to ordinary, reasonable, and usual personal, 
family, or household uses. If the product is put to any 
business, commercial, or industrial use such as, but not 
limited to, commercial landscaping, mowing or snow 
removal services, or golf course or park maintenance, or 
agricultural or farmstead use, then the duration of this 
warranty is ninety (90) days after the date of purchase, or 
one (1) year after the date of purchase if the product is 
labeled as a Professional/Commercial Product. The duration 
of this warranty shall be ninety (90) days after the date of 
purchase if any product is rented or leased.

2-Year Limited Lawn and Garden 
Commercial Warranty

The Ariens Company (Ariens) warrants to the original 
purchaser
 that all Gravely Pro and ProMaster products 
manufactured by Ariens will be free from defects in material 
and workmanship for a period of two (2) years after the date 
of purchase or 1000 hours of use, whichever comes first. An 
authorized Gravely dealer will repair any defect in material or 
workmanship, and repair or replace any defective part, 
subject to the conditions, limitations and exclusions set forth 
herein. Such repair or replacement will be free of charge to 
the original purchaser (labor and parts), except as noted 
below.

The duration of this warranty shall be ninety (90) days after 
the date of purchase or 1000 hours of use, whichever comes 
first, if any product is rented or leased.

3-Year Limited Sno-Thro Warranty

Ariens Company (Ariens) warrants to the original 
purchaser
 that Sno-Thro products manufactured by Ariens 
Company will be free from defects in material and 
workmanship for a period of three (3) years after the date of 
purchase, and will repair any defect in material or 
workmanship, and repair or replace any defective part, 
subject to the conditions, limitations and exclusions set forth 
herein. Such repair or replacement will be free of charge to 
the original purchaser (labor and parts), except as noted 
below.

The three-year duration of this warranty applies only if the 
product is put to ordinary, reasonable, and usual personal, 
family, or household uses. If the product is put to any 
business, commercial, or industrial use, then the duration of 
this warranty is ninety (90) days after the date of purchase, 
or one (1) year after the date of purchase if the product is 
labeled as a Professional/Commercial Product. The duration 
of this warranty shall be ninety (90) days after the date of 
purchase if any product is rented or leased.

DURA-CLEAN™ Auger Limited Lifetime 
Warranty

Ariens Company (Ariens) warrants to the original 
purchaser
 that the rubber components of the 
DURA-CLEAN™ Auger manufactured by Ariens Company 
will be free from defects in material and workmanship and 
will not wear out for the life of the Sno-Thro, except as noted 
below.

Ariens Company will provide for the replacement of any of 
the rubber components of the DURA-CLEAN™ Auger found 
upon examination by the Ariens Company to be defective or 
worn out. Replacements will be supplied free of charge. 
Labor is not included after two (2) years from the date of 
purchase of the Sno-Thro.

The lifetime limited warranty shall apply if the product is put 
to ordinary, reasonable, and usual personal household use. 
If the product is put to any business, commercial, industrial, 
rental, or leased use, the warranty shall be against defects in 
material and workmanship for ninety (90) days following the 
date of purchase.

Summary of Contents for Pro-Stance 99410000-1948FL













































Reviews: