Gravely 992220 Owner'S/Operator'S Manual Download

Page: 47 / 52

Commercial_2011

Commercial Mowing

Equipment Limited Warranty

Ariens Company (Ariens) warrants to the

original purchaser

that Ariens, Gravely and Countax brand

products purchased on or after 1/1/2011 and designated or labeled commercial products by Ariens Company

will be free from defects in material and workmanship for the time period noted in the chart below. Equipment

put to personal use around a single household or residence is considered "Consumer Use"; equipment put to

any business use (agricultural, commercial, or industrial) or used at multiple locations is considered

"Commercial Use." If any product is rented or leased, then the duration of these warranties shall be 90 days

after the date of purchase.

An authorized Ariens dealer (Ariens brand products), Gravely dealer (Gravely brand products), or Countax

dealer (Countax brand products) will repair any defect in material or workmanship, and repair or replace any

defective part, subject to the conditions, limitations and exclusions set forth herein. Such repair or

replacement will be free of charge (labor and parts) to the original purchaser except as noted below.

*Whichever comes first.

Special Extensions

The chart below details special extensions to this warranty:

Exceptions and Limitations

The chart below details special exceptions to this warranty:

Warranty

Code

Product Group

Warranty Period

Consumer Use

Warranty Period

Commercial Use

Pro-Turn, Pro-Master, Compact-Pro,

Pro-Stance, Pro-Ride, Pro-Walk Mowers,

Pro-Zoom, etc.

3 Years or 1000 hrs*

2 Years or 1000 hrs*

Turf Mowing Equipment: CL, TRM, TVM,

FP, PM-3084, etc.

3 Years or 1000 hrs*

2 Years or 1000 hrs*

Pro 20 Series Walk-Behind Mowers

3 Years

1 Year

N/A

Service (replacement) Parts

90 Days (no labor)

Warranty

Code

Warranty Exception

Warranty

Period

Use

Detail

Mower Deck Shell on

Commercial Mowers

Lifetime

All

2 Years parts and labor (Commercial),

3 Years parts and labor (Consumer),

parts-only thereafter.

Main Frame on

Commercial Mowers

Lifetime

All

2 Years parts and labor (Commercial),

3 Years parts and labor (Consumer),

parts-only thereafter.

Cast Iron Deck Spindles

3 Years

All

3 Years for all users including

Commercial.

Reels

Lifetime

All

Warranty on reels only against bending

or breaking.

Warranty

Code

Warranty Exception

Warranty

Period

Use

Detail

All

Batteries

1 Year

All

Prorated

All

Belts, Muffler, Tires

None

Commercial These components are not covered

when used commercially.

All

Cloth, Plastic, and Rubber

Components (Including

Belts and Cables)

Maximum

2 Year or

1000 hrs*

All

Warranty is limited to 2 years or

1000 hrs for consumer use. Except as

noted above, these components are

covered for defect, not for wear.

All

Engines

See Engine

Manufacturer’s

Warranty

All

Engines are covered by engine

manufacturer’s warranty. Refer to

engine manufacturer’s warranty

statement.

Summary of Contents for 992220





















































Search results

Summary of Contents for 992220

Reviews:

Related manuals for 992220

Brands by name

Popular brands

Gravely 992220, Owner'S/Operator'S Manual

Search results

Summary of Contents for 992220

Reviews:

Related manuals for 992220

Brands by name

Popular brands