Form No. 3355-183 Rev B
Canadian Decal Kit
For 2006 Toro Lawn Mower with Briggs and Stratton
Engine
Model No. 108-8179
Model No. 110-7498
Installation Instructions
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Step
Description
Qty.
Use
1
Decals
3
Install the decals.
Note:
Visit www.Toro.com and download the French
Operator’s Manual
that corresponds to the model
and serial number of the product on which this kit is installed.
Step
1
Installing the Decals
Parts needed for this step:
3
Decals
Procedure
Install the decals in the positions indicated in the
table below. Place each Canadian decal directly
over the corresponding US English decal.
Install each decal as follows:
1. Thoroughly clean the area where you will
install the decal.
2. Dampen the area with water or mildly soapy
water.
3. Peel the decal from the backing and install it in
place as shown in Figure 1.
Figure 1
1. Decal 104-7908
3. Decal 94-8072
2. Decal 112-8759
4. Squeegee across the surface of the decal,
starting at the center of the decal and working
toward the edges, using overlapping strokes.
© 2006—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA.
All Rights Reserved
