Page 8.2
Never put your hands or fingers between the two heating plates! Danger of
injury! Danger of burns! Never leave children unattended with the press!
Remove the pressed material with heat-resistant gloves or tools and proceed
extremely carefully.
Make sure that the heating plates have cooled down completely before
cleaning. Clean the heating plates regularly. Apply a small amount of alcohol
to a clean cloth and wipe the plates. It is best to use at least 80% isopropyl
alcohol by volume.
Wipe the plates with a dry, clean cloth.
Repeat these steps to clean all associated components.
Place the prepared material in the middle of the lower plate.
Use the lever (depending on the model) to push the cylinder upwards until
the desired pressure is reached.
Wait until the countdown has expired and the press starts beeping.
Press the Timer button again to turn off the timer and stop the beep.
Open the press with the knob, lever or pressure release screw. (Depending
on the model)
Always switch off the Device when you no longer use the it!
Commissioning
GRAVEDA®
GRASPRESSO®
Registered Trade Mark Registered Trade Mark
#GRAVEDALOVESYOU