Page 8.1
1.
Press the setting button to access the temperature setting
for the two heating plates. On the control panel, the
temperature setting display page flashes.
2.
Now press the "up" or "down" button to set the desired
temperature.
3.
Press the setting button again to enter the time setting
mode. On the control panel, the time setting display page
flashes.
4.
Now press the "up" or "down" button to set the desired
time in seconds.
5.
After setting the time and temperature, you can close the
press with the lever. On the control panel you will see a
counter that shows the number of pressings so far.
6.
Press the start/stop button. The press will automatically
close and start the process and count backwards based on
the previously set time. After the stopwatch has expired,
you can carefully open the press. Press the Start/Stop
button again. ATTENTION - the plates are hot! You can
stop the timer beeping by pressing the timer button or
restart the timer.
Commissioning
GRAVEDA®
GRASPRESSO®
Registered Trade Mark Registered Trade Mark
