GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Änderungen vorbehalten! Keine Haftung für Druckfehler 03/2007
34
An unobstructed work area of generous size is very helpful for all types of modelling
activity.
If you are a beginner to modelling and are not sure about any of the more difficult
processes, ask an experienced modeller for advice and help.
Rules of behaviour
Never
fly your model from a public road, path or square, or in the vicinity of buildings
or high-tension overhead cables.
Don’t fly your PYRIT in nature reserves, protected areas or SSSIs (Sites of Special
Scientific Interest). Please have respect for the animals and plants which live in and
around your flying site.
Bear in mind that trees and bushes are the living space and nesting sites of birds,
and should not be disturbed unnecessarily.
Never
endanger animals, spectators or other pilots.
Radio control system for the PYRIT
The following items represent the minimum equipment for this model:
1 X-412 computer RC system, 35 MHz band
Order No. 4713
or 4713.261.2 (includes two C261 servos), or 4713.B
3 C 261 pico-servo
Order No. 5125.lose
1 R 700 micro-receiver
Order No. 3551
1 Y-lead
Order No. 3936.11
2 Servo extension lead
Order No. 3935.32
Please see the main GRAUPNER FS catalogue for details of battery chargers.
ECO electric power system and accessories
1 SPEED 400 PLUS 7.4 V
Order No. 6505
1 NiMH 2/3 1000 flight battery, 7.2 V / 1.0 Ah
Order No. 98834.6ST
1 CAM FOLDING PROP
Order No. 1335.15.8
High-performance electric power system and accessories
1 SPEED 400 PLUS 7.4 V
Order No. 6505
1 LiPo 2 / 1500 flight battery, 7.4 V / 1.5 Ah
Order No. 7638.2
1 CAM FOLDING PROP
Order No. 1335.15.8
1 Velcro cable tie
Order No. 1587
The model is extremely highly pre-fabricated, and is built to a superb standard of
quality. The kit includes a GRP fuselage as standard. Please check first that the
covering film is stuck down all round, and run a film iron along the seams if you are
not sure. This applies in particular to hinge slots and film overlaps. We recommend
that you apply clear adhesive tape over the faces into which the control surface
hinges are to be fitted, because moisture tends to creep under the film at such areas,
causing it to lift.
