background image

27

28

Pressing the STOP button will cause the pop-up window 
to appear, asking for a confimation that you want to stop 
the operation. Tapping either the STOP or ESC button will 
cause  the  charger  to  either  stop  or  continue  the  cycle, 
respectively. 

   ◎ BALANCE PAGE

   ◎ DATA VIEW PAGE

Tapping the BALANCE icon on the main page will access the balance mode. Tap the DEC/INC Buttons 
to toggle between the 3 modes. Tap the Enter button to initiate the balancing process. The selected 
mode is used with the batteries that are equipped with a cell balance connector (LiPo, LiIon, LiFe 
batteries).

Tap the BALANCE icon to access the balance 
mode. 
(The balance connector should be installed.)

Tap the DATA icon to check the charge/discharge 
data on the main page.

LiPo, Lilon, LiFe battery balance page
This page (left) displays the connected battery parame-
ters.

Tapping will activate the box (blue). The battery memory 
can then be selected.

BALANCE MODE 1  

BALANCE MODE 2 

Tap the DATA icon on the main page to access the data view mode. There are 3 view modes. After 
activating the buttons, the data can be programmed by tapping the DEC/INC buttons. In the Cycle data 
and Graph data modes, the data can be accessed. In the Normal data mode, the parameters can not 
be programmed.

BALANCE MODE 3 

1) BALANCE MODE 1 : This page (above, left) shows the basic date of the battery. 
2) BALANCE MODE 2 : This page (above, center) shows the cell voltage and internal
                        impedance values.
3) BALANCE MODE 3 : This page (above, right) displays multiple parameters.
   - Center Voltage(Vc): The voltage of the center in the Y axis. 
   - Range Voltage(Vr) : The voltage range of every section in the Y axis
   - Manual / Auto  
      Manual: The graph can be manually operated. Tap the data box to activate. Tap the DEC/INC
               buttons to program the parameters. The Center Voltage and Range Voltage can 
               be activated and programmed using the manual setup.
      Auto: This mode performs an automatic setup of the graph for the operation.
             Each cell voltage is activated and checked.
   - Cell Voltage : Displays the cell voltage. Tapping activates this paramter, allowing the cell data to
                       be checked.

Center voltage

Range voltage

Cell Voltage

Manual / Auto

USER NAME

USER NAME

Summary of Contents for Polaron EX

























Reviews: