GRAUPNER PITTS S12, Building Instructions

Page: 72 / 87

72
GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Keine Haftung für Druckfehler. Technische Änderungen vorbehalten! 04/2007
ID# 0057887
strut reinforcement
17 Fin reinforcement 1 Flat CFRP strip 6 x 1 x 343 mm
18 Tailplane reinforcement 1 Flat CFRP strip 6 x 1 x 634 mm, remainder from
rudder reinforcement
19 Cabane brace 2 Flat CFRP strip 6 x 1 x 191 mm, from scrap
20 Elevator pushrod (2) 1 Round CFRP rod 2 Ø x 30 mm, from scrap
21 Connecting wedge 4 Birch Laser-cut, 3 mm
22 Top wing panel 2 Depron® Laser-cut, 6 mm thick
23 Bottom wing panel 2 Depron® Laser-cut, 6 mm thick
24 Top wing centre section 1 Depron® Laser-cut, 6 mm thick
25 Bottom wing centre section 1 Depron® Laser-cut, 6 mm thick
26 Top aileron 2 Depron® Laser-cut, 6 mm thick
27 Bottom aileron 2 Depron® Laser-cut, 6 mm thick
28 Glass fibre adhesive tape - Order No. 98709 As required; not included in the kit
29 Aileron horn 2 Beech Laser-cut, 2 mm thick
30 Ball-end bolt 2 Steel Ready made, M2 thread
31 Front strut support 2 Beech Laser-cut, 2 mm thick
32 Rear strut support 2 Beech Laser-cut, 2 mm thick
33 Wing centre section support 2 Beech Laser-cut, 1 mm thick
34 Threaded sleeve 8 Aluminium Machined part
35 Rigging support 2 Beech Laser-cut, 1 mm thick
36 Top strut end support 2 Beech Laser-cut, 1 mm thick
37 Bottom strut end support 2 Beech Laser-cut, 1 mm thick
38 Strut guide 4 Birch Laser-cut, 3 mm thick
39 Wing strut 2 Depron® Laser-cut, 6 mm thick
40 Fin 1 Depron® Laser-cut, 6 mm thick
41 Central fuselage spine 1 Depron® Laser-cut, 6 mm thick
42 Large locating plate 2 Birch Laser-cut, 3 mm thick
43 Undercarriage support 2 Birch Laser-cut, 3 mm thick
44 Small locating plate 4 Birch Laser-cut, 3 mm thick
45 Cabane support 4 Birch Laser-cut, 3 mm thick
45 Left fuselage side panel 1 Depron® Laser-cut, 6 mm thick
46 Servo mount, C 5077 3 Beech Laser-cut, 2 mm thick
47 Servo mount, DS 3728 or DS 3781 3 Beech Laser-cut, 2 mm thick
48 Right fuselage side panel 1 Depron® Laser-cut, 6 mm thick
49 Support former 2 Depron® Laser-cut, 6 mm thick
50 Snake outer sleeve 3 Hard PVC 3.2 x 2.2 mm, 70 mm long
51 Elevator pushrod guide 2 Depron® Laser-cut, 6 mm thick
52 Rudder pushrod guide 1 Depron® Laser-cut, 6 mm thick
53 Tailplane 1 Depron® Laser-cut, 6 mm thick
54 Tailwheel unit 1 Steel Pre-formed, 1.5 mm Ø
55 Rudder 1 Depron® Laser-cut, 6 mm thick
56 Horn 3 Beech Laser-cut, 2 mm thick
57 Tailwheel unit support 2 Beech Laser-cut, 2 mm thick
58 Short in-fill piece 1 Beech Laser-cut, 1 mm thick
59 Long in-fill piece 1 Beech Laser-cut, 2 mm thick
60 Supplementary rudder reinforcement 1 Beech Laser-cut, 1 mm thick
61 Heavy-duty servo output arm 4 Order No. 3544 Not included in the kit
62 Threaded coupler 17 Steel Machined
63 Clevis 13 Steel Pre-formed
64 Magnet 12 - 20 x 4 x 1.8 mm
65 In-fill piece for magnet 4 Birch Laser-cut, 3 mm thick
66 Front fuselage former 1 Depron® Laser-cut, 6 mm thick
67 Bottom motor dome reinforcement 2 Depron® Laser-cut, 6 mm thick
68 Top motor dome reinforcement 2 Depron® Laser-cut, 6 mm thick
69 Motor bulkhead 1 Beech Laser-cut, 2 mm thick
70 Ball-link 2 Plastic Inj. moulded, with brass ball
71 Cheesehead slot-head screw 2 Steel M2 x 8 mm
72 Duo pushrod connector 1 Aluminium Machined
73 Grubscrew 4 Steel M3 x 3 mm
74 Right fuselage shell 1 Depron® Vac.-moulded, 3 mm thick
75 Left fuselage shell 1 Depron® Vac.-moulded, 3 mm thick
76 Undercarriage doubler 2 Birch Laser-cut, 3 mm thick
77 Front cabane doubler 2 Birch Laser-cut, 3 mm thick