GRAUPNER HOT TG/mz-12, Operating Instruction

Page: 9 / 75

- Select model
In the home screen, press the ENT button then the model mem is highlighted. Press the ENT button
to access the function.
Press the direction button to select the model then press the ENT button to access the Sel
model type screen. Press the direction button to highlight the desired model type (Aircraft or
Helicopter) then press the ENT button to select the model type. The home screen is displayed
and the popup message “Bind N/A with the highlight on OK” appears then press the ENT button
to bind. The rx bind screen automatically appears then you may bind the transmitter to the
receiver according to the bind procedure.
9
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
ENT
ESC
TEL VIW
press
press
press
press
press
press
press
- Model name
When the model mem is highlighted, press the ENT button then the cursor is on the select model
line. Press the direction button to select the mod name line then press the ENT button to access to
the function. Press the direction button to highlight the desired character then press the ENT button
to accept. Repeat the process until completing. The name will display on the model name line.
Press the ESC button to get back to the model mem screen.
NOTE : Pressing the direction button to highlight the blank and pressing the ENT button will erase
the current character.
ENT
ESC
TEL VIW
press