GRAUPNER/SJ GmbH D-73230 KIRCHHEIM/TECK GERMANY
Modifications reserved. No liability for printing errors.
3/2013
-
4
-
The prepared left-hand fuselage side can now be trial-fitted and glued to the fuselage
framework. It is essential to check that the two fuselage sides line up accurately.
Weight the second side down as shown in the sketch until the glue has set hard.
The drawing shows the nose area of the fuselage. The next step is to glue the for-
mers (7) and (8) and the nose reinforcement (9) in place as shown. Caution: the
fuselage must be straight and symmetrical. You can check this by placing the
fuselage over the plan (fuselage plan view). Fix the parts together with modelling pins
or tape until the glue has set hard.
