GRAUPNER 33506 Manual Download

Page: 4 / 24

4 / 24

33506_33508_33512_33516_T1V2sh

Introduction

Thank you very much for purchasing the

Graupner

receiver

GR-12,

GR-16, GR-24

GR-32 HoTT

Read this manual carefully to achieve the best results with your HoTT

system and first of all to safely control your models. If you experience

any trouble during operation, take the instructions to help or ask

your dealer or

Graupner

Service Centre.

Due to technical changes, the information may be changed in this

manual without prior notice. Be always updated by checking period-

ically on our website,

www.graupner.de

to be always uptodate with

the products and firmwares.
This product complies with national and European legal require-

ments.
To maintain this condition and to ensure safe operation, you must

read and follow this user manual and all the safety notes before

using the product and you have to respect those notes also for future

use!

Note

This manual is part of that product. It contains important informa-

tion concerning operation and handling. Keep these instructions for

future reference and give it to third person in case you gave the

product.

Service centre

Graupner Central Service

Graupner/SJ GmbH

Henriettenstraße 96

D-73230 Kirchheim/Teck

Servicehotline

(+49) (0)7021/722-130

Monday - Thursday:

9:15 am - 4:00 pm

Friday:

9:15 am - 1:00 pm



[email protected]

Graupner USA
3941 Park Dr Suite 20-571
El Dorado Hills, CA 95762

Website: www.graupnerusa.com
Phone: +1 855-572-4746
Email:[email protected]

Graupner in Internet

For the service centers outside Germany please refer to our web site

www.graupner.de.

Summary of Contents for 33506

























Search results

Summary of Contents for 33506

Reviews:

Related manuals for 33506

Brands by name

Popular brands

GRAUPNER 33506, Manual

Search results

Summary of Contents for 33506

Reviews:

Related manuals for 33506

Brands by name

Popular brands