step 2
remove traveling pipes
- locate allen key and traveling pipes
- use allen key to unscrew traveling pipes from top canopy
- carefully remove top canopy
- use allen key to unscrew traveling pipes from Cadillac frame
- remove traveling pipes
note: keep pipes somewhere safe incase of relocation
you will need
allen key
STEP 3 - Place the Vertical Pipes and Canopy on Cadillac
Locate the Allen key and 4 vertical pipes. Loosen the screws and insert the 4 vertical pipes into
he flanges on the Cadillac frame (
See Figure D
). Tighten the screws until the vertical pipes are
firmly secure (
See Figure E
). Carefully place the canopy on the top of the 4 vertical pipes (
See Figure F
).
Carefully tighten the screws until the canopy is firmly secure on top of the vertical pipes (
See Figure G
).
STEP 4 - Prep for Use
Prior to using, make sure all springs are in place to your liking and are properly attached.
IMPORTANT NOTE: Two people are required to set up your Cadillac.
Gratz Industries is not responsible for any damages to the Cadillac that is caused by improper opening, set up or installation. Please email [email protected] for any inquiries.
STEP 5 - How to Position your Trapeze Set
To adjust the Trapeze set, twist
the 2 black knobs until the top
crossbar is loose
(Figure H).
Then
slide the Trapeze set to the position
of your liking
(Figure I)
. Tighten the
black knobs until the cross bar is
firmly in place
(Figure J)
.
How to Assemble Your Cadillac - pg. 2
1
3
5
7
8
6
4
2
( Figure D )
( Figure E )
( Figure F )
( Figure G )
( Figure H )
( Figure I )
( Figure J )
