Grasslin Towerchron QE1, Installation & User'S Instructions

Page: 29 / 49

20
PROGRAMMING YOUR “TOWERCHRON QE2”
SETTING CURRENT TIME AND DAY
➯
Open the keypad cover
➯
Make sure that the slide switch is on position
“SET TIME AND DAY”
to the left.
If the battery is in a fully discharged condition at the moment of installation then
the screen will be blank. The screen will start to display 2 minutes after plug-
ging into mains supply. Now operate the “RESET” button.
➯
Press the
“RESET”
button with a dull pointed instrument once
➯
Press the “DAY” button until the actual day is marked
➯
Repeatedly press
“HOUR +/-”
, then
“M/-”
buttons until
current time is displayed.
NB • If you are setting the clock in wintertime (GMT): The clock is now
correctly set. If you are setting the clock in summertime (BST): Press
the “Summer/Winter” button once. The arrowhead at the bottom
of the display moves to indicate Summertime, and the clock is
correctly set.