7
TECHNICAL PARAMETERS
PARTS
1.
Termostat Knob (waffle browning level 1-5)
2.
Power LED (red)
3.
Ready LED (green)
4.
Non-stick plates
5.
Cover
6.
Handle
7.
Feet
8.
Base
DESIGNATION
The waffle maker is provided for use in home and similar conditions. Do not use the appliance outdoors.
FIRST SWITCH ON
WARNING!
Make sure that the power source to which the appliance is to be connected is accordant with the parameters
specified on the rating plate.
The Waffle iron is manufactured in the first protection class, which means that it should be plugged into
a socket with an earthing prong.
Before first use of the appliance clean and then precisely dry all surfaces contacting food.
Do not immerse in water!
Before each actuation of the appliance check its status in scope of mechanical damage and check whether
the power cord is not damaged.
Don’t use damaged device.
Accessible surfaces may become hot during operation! Do not touch!
1.
Remove all the packaging components
2.
Place the waffle iron on a flat, even, horizontal surface
3.
Connect the waffle iron to the mains. A red LED will light and remain lit for the entire period when
the device is on
4.
Grease the heating plates with edible oil
5.
Close the cover and set the thermostat to the maximum value (5)
6.
Heat the device to the maximum temperature. When the device reaches the set temperature,
a green LED lights. The thermostat will retain the temperature set by the user, by switching the
heating component on and off
7.
When the device warms up (a green LED is on), pour the batter and bake first two waffles
8.
After preparing the first two waffles throw them, turn the appliance off, leave until the
temperature falls and clean it
Voltage
220
–
240 V
Frequency
50 Hz
Rated power
1200 W
