GRASS VALLEY TRITON TTN-BAV-0808, Installation Manual

Page: 23 / 27

BAV-0808 Rev. 0
15
- Push “ A/V Toggle ”, and select A+V (Red + Green light),
- Disconnect all inputs, i.e. No inputs are lit,
- Repeat the last three lines for all outputs 3 – 8 too.
Step 4. - Push “ F3 ”,
- Push “ OUT1 ”,
- Push “ A/V Toggle ”, and select A+V (Red + Green light),
- Push “ IN3 ”
- Push “ OUT2 ”,
- Push “ A/V Toggle ”, and select A+V (Red + Green light),
- Disconnect all inputs, i.e. No inputs are lit,
- Repeat the last three lines for all outputs 3 – 8 too.
Step 5. - Push “ F4 ”,
- Push “ OUT1 ”,
- Push “ A/V Toggle ”, and select A+V (Red + Green light),
- Disconnect all inputs, i.e. No inputs are lit,
- Push “
A/V Toggle ”, and select Audio (Red light),
- Push “ IN4 ”
- Push “ OUT2 ”,
- Push “ A/V Toggle ”, and select A+V (Red + Green light),
- Disconnect all inputs, i.e. No inputs are lit,
- Repeat the last three lines for all outputs 3 – 8 too.
Step 6. - Push “ F5 ”,
- Push “ OUT1 ”,
- Push “ A/V Toggle ”, and select A+V (Red + Green light),
- Disconnect all inputs, i.e. No inputs are lit,
- Push “
A/V Toggle ”, and select Audio (Red light),
- Push “ IN5 ”
- Push “ OUT2 ”,
- Push “ A/V Toggle ”, and select A+V (Red + Green light),
- Disconnect all inputs, i.e. No inputs are lit,
- Repeat the last three lines for all outputs 3 – 8 too.
Step 7. - Push “ F8 ”,
- Push “ OUT1 ”,
- Push “ A/V Toggle ”, and select A+V (Red + Green light),
- Disconnect all inputs, i.e. No inputs are lit,
- Repeat the last three lines for all outputs 2 – 8 too.
Step 8. - Push “ Panel Enable ”, to save all salvos, and stop programming.
Step 9. - Push “ Panel Enable ” again, to enable operation of the BAV-0808 again.
This completes the programming example.