GRASS VALLEY TRITON TTN-BAV-0808, Installation Manual

Page: 22 / 27

BAV-0808 Rev. 0
14
When programming the salvos, use the A/V Toggle button to program separate operations for video and
audio (breakaway). When using breakaway, remember that only the chosen layer (video and/or audio) will
be subject to switching when the setting is stored.
Example: If only the red light is lit in the A/V Toggle button when the next output is selected, the video
will be left unchanged for the previous output.
Disconnect output is programmed by pushing the selected input a second time, same as for normal
operation. Remember that the green (video) and/or red (audio) light in the A/V Toggle button must be lit,
in order to program, or disconnect. If not, an “unchanged” command is stored instead.
An example of how to program salvos on the BAV-0808 is shown hereunder.
Example:
The following configuration is applicable in the example:
•
IN1 : VGA Video from PC + PC audio
•
IN2 : VHS Video Player.
•
IN3 : DVD Player
•
IN4 : CD Player (Only Audio)
•
IN5 : Cassette Player (Only Audio)
•
OUT1 : VGA input on Pro Audio Amplifier
•
OUT2 : Composite input (V+A) on Projector
The salvo’s we want are the following:
•
F1 : V
in
1 to V
out
2 + A
in
1 to A
out
1, (all other inputs shall be disconnected)
•
F2 : V/A
in
2 to V/A
out
1, (all other inputs shall be disconnected)
•
F3 : V/A
in
3 to V/A
out
1, (all other inputs shall be disconnected)
•
F4 : A
in
4 to A
out
1, (all other inputs shall be disconnected)
•
F5 : A
in
5 to A
out
1, (all other inputs shall be disconnected)
•
F8 : All inputs (V+A) to any outputs shall be disconnected
Step 1. Engage “ Salvo Programming Mode ” (See above for instructions).
Step 2. - Push “ F1 ”,
- Push “ OUT1 ”,
- Push “ A/V Toggle ”, and select A+V (Red + Green light),
- Disconnect all inputs, i.e. No inputs are lit,
- Push “
A/V Toggle ”, and select Audio (Red light),
- Push “ IN1 ”
- Push “ OUT2 ”,
- Push “ A/V Toggle ”, and select A+V (Red + Green light),
- Disconnect all inputs, i.e. No inputs are lit,
- Push “
A/V Toggle ”, and select Video (Green light),
- Push “ IN1 ”
- Push “ OUT3 ”,
- Push “ A/V Toggle ”, and select A+V (Red + Green light),
- Disconnect all inputs, i.e. No inputs are lit,
- Repeat the last three lines for all outputs 4 – 8 too.
Step 3. - Push “ F2 ”,
- Push “ OUT1 ”,
- Push “ A/V Toggle ”, and select A+V (Red + Green light),
- Push “ IN2 ”
- Push “ OUT2 ”,