GRASS VALLEY LDK 5000, Operator'S Manual

Page: 36 / 68

4-8 Operator's Manual - LDK 5000 Location of Controls
ND/RE BATT
TAPE REC ++
+
-
AW2 AW1 FL 7.5 5.6 3.2
FOC+
4.7
!
Viewfinder Indicators
Gain indicators
The gain indicators in the viewfinder light as follows:
- Gain is - (-3, -6dB)
+ Gain is + (+3, +6, +9dB)
++ Gain is ++ (+6, +9, +12dB)
+ and ++ Gain is +++ (+12dB))
Top indicators
REC lights when the camera is on-air.
TAPE lights when the studio ISO signal is received.
BATT lights if the supply voltage is less than 11V.
ND/RE lights when an ND optical filter or the lens range
extender is selected.
FOC+ lights when the focus assist function is on.
Iris indication
Indicates the value of the iris opening (when enabled in the
VF menu).
Zebra pattern
This diagonal line pattern warns the operator that the area
affected has risen above a predetermined level of the full
scale video exposure value. Level and contrast are selected
in the VF menu.
Safe area marker
The safe area marker indicates an area that represents
80% of the whole viewfinder picture area. This is the
minimum area seen on a TV-set.
Non standard indicator
The non-standard video settings indicator (!) lights when
exposure is not set to nominal. It also lights when black
stretch or extended iris is on and if AWC or FL is selected
with the Colour Temperature selector.
White Balance indicators
The white balance indicators light as follows:
3,2 - preset temperature of 3200K is selected
4,7 - preset temperature of 4700K is selected
5,6 - preset temperature of 5600K is selected
7,5 - preset temperature of 7500K is selected
FL - memory for fluorescent light is selected
AW1 - memory 1 is selected
AW2 - memory 2 is selected
None of these indicators light if AWC is selected.
Message box
The display time of this information message box is set by
the Info time item of the VF menu.
Centre marker
This cross marks the centre of the picture.
Cadre marker
These dotted white lines or a shaded area show the limits
of a 4:3 picture, or the limits of a 14:9 picture.
Zoom indication
Indicates the degree to which the lens has been zoomed
in or out if this feature is supported by the lens. It shows 50
if not supported.
1
2
3
4
5
6
8
9
10
11
1
2
3
4
5
6
7
8
9
10
11
7