GRASS VALLEY Kudos Pro LC4000 User Manual Download Page 54

Page: 54 / 83

RollCall Control Panel

Input Spigots

Option

Operation

Spigot Pane

Displays spigot direction, associated BNC connector, current
module status, the last

Take

performed on the spigot and

how it was made, e.g. via RollCall or an external agent such as
VSM.

The following controls are also available:

•

Streaming

- set the redundancy options for this spigot.

This will also determine the bandwidth to be used.
Options are:

•

Dual

- full redundancy, both Primary and Secondary

available.

•

Single

- Primary only, but with all available

bandwidth.

•

- Primary only.

•

- Secondary only.

•

Format

- select the maximum expected bandwidth

requirement for this spigot.

Sender Pane

•

Ext Headers

- Extended header operation can be

adjusted for TR-03/TR-04 compatibility.

Extended headers provide in-band metadata regarding
the essence flow and its format, and are applicable to ST-
2110 only. If third-party equipment is unable to support
this, the functionality can be disabled, or set to

(Legacy)

, which ensures that the packet format complies

with ST2110 but has no video content.

• Options are:

•

Off

- Extended headers are disabled.

•

- Sends extended headers fully compliant with

ST2110-20.

•

On (Legacy)

- Sends extended headers that are

compatible with releases earlier than V11.73D.76.

•

Num Audio Channels

- select the number of audio

channels present on this spigot.

•

Packet Time

- select the amount of time required to

complete the transmission of each packet.

•

SDI Input CRC Errors

- enable the check box to display

the number of CRC errors. Click

Clear

to reset the

counter to zero.

•

Spigot Link

- indicates the spigot link status for the

selected spigot, as set on the

Link Control

page (see

page 46

Control is displayed only if spigots are linked.

Take

Click to apply changes.

Summary of Contents for Kudos Pro LC4000




















































































Search results

Summary of Contents for Kudos Pro LC4000

Reviews:

Related manuals for Kudos Pro LC4000

Brands by name

Popular brands

GRASS VALLEY Kudos Pro LC4000, User Manual

Search results

Summary of Contents for Kudos Pro LC4000

Reviews:

Related manuals for Kudos Pro LC4000

Brands by name

Popular brands