GRASS VALLEY Kudos Pro LC4000 User Manual Download Page 2 | Manualshive

Page: 2 / 83

background image

ii

Notices

Patent Information

This product may be protected by one or more patents.

For further information, please visit:

www.grassvalley.com/patents/

Copyright and Trademark Notice

Copyright © 2020, Grass Valley Canada. All rights reserved.

Grass Valley®, GV® and the Grass Valley logo are trademarks or registered trademarks of Grass
Valley USA, LLC, or its affiliated companies in the United States and other jurisdictions. Grass
Valley products listed in this document are trademarks or registered trademarks of Grass Valley
USA, LLC or its affiliated companies, and other parties may also have trademark rights in other
terms used herein.

Registered trademarks (®) are registered in one or more countries worldwide.

Copyright © 2020 Grass Valley Canada. All rights reserved. Specifications subject to change
without notice.

Terms and Conditions

Please read the following terms and conditions carefully. By using Kudos Pro IP documentation,
you agree to the following terms and conditions.

Grass Valley hereby grants permission and license to owners of Kudos Pro IP to use their
product manuals for their own internal business use. Manuals for Grass Valley products may not
be reproduced or transmitted in any form or by any means, electronic or mechanical, including
photocopying and recording, for any purpose unless specifically authorized in writing by Grass
Valley.

A Grass Valley manual may have been revised to reflect changes made to the product during its
manufacturing life. Thus, different versions of a manual may exist for any given product. Care
should be taken to ensure that one obtains the proper manual version for a specific product
serial number.

Information in this document is subject to change without notice and does not represent a
commitment on the part of Grass Valley.

Warranty information is available from the Legal Terms and Conditions section of Grass Valley’s
website (

www.grassvalley.com

).

Title

Kudos Pro IP User Manual IP Interface Supplement

Part Number

Issue 2 Revision 1

Revision

2020-12-23, 11:57

«
1
2
3
4
...
»

Summary of Contents for Kudos Pro LC4000




















































































Reviews:

No comments

Related manuals for Kudos Pro LC4000

Brand: Olimpia splendid Pages: 47

Brand: Audio Note Pages: 7

Brand: B&B Electronics Pages: 2

MediaServer MS5000

Brand: Imerge Pages: 68

Brand: 3onedata Pages: 3

Brand: M-Audio Pages: 2

Brand: G2 Pages: 13

Brand: Datavideo Pages: 28

Adaptatone 5530M-485 Series

Brand: Edwards Signaling Pages: 13

DEMO CIRCUIT 1672A

Brand: Linear Technology Pages: 13

Brand: CEL-MAR Pages: 16

Q.PEAK DUO-G5 series

Brand: Q CELLS Pages: 12

Brand: Sungrow Pages: 115

Brand: I.D. AL Pages: 42

climatronic converter WMS UP

Brand: WAREMA Pages: 4

Brand: ADF Web Pages: 42

Brand: Qdecoder Pages: 2

ControlVIT CV10 series

Brand: Salicru Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands