GRASS VALLEY Kudos Pro LC4000, User Manual

Page: 61 / 83

61
Kudos Pro IP
User Manual
The following logging options are available. Enable check boxes to activate log fields as
required.
Log Field Description
SN= Reports the module serial number, which consists of an S
followed by eight digits.
Note : this cannot be deselected.
OS_VERSION= Reports the operating system name and version.
BUILD_NUMBER= Reports the build number.
HARDWARE_VERSION= Reports the hardware version number.
HARDWARE_MOD= Reports the hardware modification number.
HARDWARE_BUILD= Reports the hardware build number.
FEATUREBOARD_

VERSION=
Reports the rear module daughter board version number.
FEATUREBOARD_MOD= Reports the rear module daughter board modification
number.
FEATUREBOARD_BUILD= Reports the rear module daughter board build number. Valid
values are:
• FB1
• FB2
FIRMWARE_VERSION= Reports the firmware version number.
UPTIME= Reports the time since the last restart in the format
ddd:hh:mm:ss .
RC_UPTIME= Reports time RollCall has been up in the format ddd:hh:mm:ss .
ROL_STATES= Reports the RollCall status. Valid values are:
• OK
• FAIL: n where n is the RollTrack index or indexes which are
failing
• Disabled
REAR_ID= Reports the code number of the rear fitted.
REAR_STATUS= Reports the status of the rear where it can be determined.
SLOT_WIDTH= Reports the slot width. IQUCP25 modules are available in
single and triple width.
SLOT_START= Reports the slot in the rack where the module is located.
POWER_USAGE= Reports the power usage in PR Units (for IQH4B-type frames).
Note : this cannot be deselected.
TEMP _N_ CELSIUS= Reports the temperature status of the FPGA.
Note : this cannot be deselected.
TEMP_ N _NAME= Temperature measurement name.
REFERENCE_ N _SOURCE= Reports time reference source.
REFERENCE_ N _STATE= Valid values are:
• OK:Locked
• OK:Input
• WARN:Freerun
• WARN:CrossLock