6
Kaleido-RCP2
Selecting a Room
display. To access the menu press and hold the ENTER button until the ESC button lights up,
and then use the keys to navigate, as indicated below:
Kaleido-RCP2 Configuration menu summary
Selecting a Room
Use the
Configuration
menu to select the room you wish to access with your Kaleido-
RCP2—the
ON AIR
room, for example. Once you select the room, you can log on as a
specific user, corresponding to one of the login positions that are available for this room
2
Move UP
8
Move DOWN
ENTER
Access the submenu, or select the displayed value
ESC
Go back to the previous menu level, or cancel a value selection
Note:
These keys are lit when menu access is enabled.
Display the firmware version
Display the current IP address
Display the current subnet mask
Display the current gateway address