31
Kaleido-MX (3RU)
Hardware Description & Installation Manual
The following table lists some (but not all) output formats supported at the HDMI
connections. You can customize your own timing rates for resolutions ranging from
1024 × 768 pixels up to 1920 × 1200 pixels (all progressive scan), by using XEdit.
Network Settings Panel
Kaleido-MX output cards are shipped with default network settings, which you must
replace with values suitable for your network environment. You may need to consult your
network administrator to get the correct values. Enter the appropriate IP address, mask and
gateway information to configure a Kaleido-MX output card within your Ethernet network.
Kaleido-MX HDMI output resolutions
Resolution
Format name
Refresh rates (Hz)
1024 × 768
XGA
50.00, 59.94
1280 × 720
Margay
50.00, 59.94
1280 × 768
WXGA
50.00, 59.94
1280 × 1024
SXGA
50.00, 59.94
1280 × 1024
BARCO
59.94
1360 × 768
NEC
50.00, 59.94
1480 × 1200
Christie
50.00, 59.94
1600 × 1200
UXGA
50.00, 59.94
1920 × 1080
Baycat
50.00, 59.94
1920 × 1200
WUXGA
50.00, 59.94
Note:
All output cards within a Kaleido-MX frame must have their output
heads configured with the same refresh rate. If your frame is referenced, then
the heads’ refresh rate must also match the reference signal's refresh rate.
