GRASS VALLEY KALEIDO-MX Hardware Description & Installation Manual Download

Page: 39 / 55

Kaleido-MX (3RU)

Hardware Description & Installation Manual

If the Status LED is steady red (not blinking), use the Densité frame control panel to review
card status information (see

Local Control Panel Menu Structure

, on page 27). If the card

status menu reports that an update is in progress, then you know that you should not
interrupt this process (by reseating the card, for example).

Output card power LED

Monitors the status of the power supplies on board the Kaleido-MX card.

Output card heartbeat LED

Monitors the status of the system firmware.

Memory card access LED

Monitors read/write operations to the SD memory card.

ETH communication LED

This LED is always OFF, and currently not relevant.

CPU 0 LED (not used)

This LED is always orange, and currently not relevant.

CPU 1 LED

Monitors the status of the firmware during the startup process.

LED

Meaning

Green

OFF

Failure of an on-board PSU, or there was a glitch on the 3.3V PSU (in which
case reseating the card may resolve the problem). In the first case, reseating
the card will not resolve the problem.

LED

Meaning

Blinking red

System OK (

heartbeat

signal)

LED

Meaning

OFF

No read/write operations in progress

Blinking green

Read of write operation in progress

LED

Meaning

Green

Normal (the Kaleido-X software, XEdit, XAdmin are available)

Blinking orange

Firmware initialization completed (waiting for the Kaleido-X
software to start)

Orange

Transitory state during firmware initialization

Red

Initial state

Summary of Contents for KALEIDO-MX
























































Search results

Summary of Contents for KALEIDO-MX

Reviews:

Related manuals for KALEIDO-MX

Brands by name

Popular brands

GRASS VALLEY KALEIDO-MX, Hardware Description & Installation Manual

Search results

Summary of Contents for KALEIDO-MX

Reviews:

Related manuals for KALEIDO-MX

Brands by name

Popular brands