GRASS VALLEY K2 Lx0, Instruction Manual

Page: 46 / 56

46 K2 Lx0 RAID Instruction Manual July 31, 2008
Chapter 3 Servicing the K2 Lx0 RAID
controller, see “Replacing a RAID controller or expansion adapter” on page 43 .
2. Remove the cover by sliding it while pressing the lock, as indicated in following
diagram.
3. Holding the battery plug, unplug it from the controller. Do not pull while holding
on the cable.
4. Remove the battery from the controller.
5. Place the new battery in the controller, and firmly insert the plug into the battery
connector.
6. Replace the controller cover.
7. Return the controller to the chassis as described in “Installing a RAID controller or
expansion adapter” on page 44 .
Adding expansion ports
If using an L30 or L30R K2 Lx0 RAID, additional expansion ports can be added to
the controller or controllers.
HO
T
Lock
Battery
Battery plug