GRASS VALLEY K2 Lx0, Instruction Manual

Page: 41 / 56

July 31, 2008 K2 Lx0 RAID Instruction Manual 41
Installing disk module
4. With both hands, hold the sides and underside of the disk module. Remove the disk
module as illustrated in the following diagram.
Installing disk module
CAUTION: If the RAID chassis does not have the redundant controller
option, when a replacement disk module is inserted there can be a 1.5
second disruption. Video record/play is not affected.
Before installing the disk module, make sure that you:
• Wait at least three minutes after removing the previous disk module.
• Put a location label on the replacement disk drive, as appropriate for the slot into
which it is installed.
1
Push the circled portion.
2
While pushing
the circled
portion, swing
the lever 40 degrees.
0
2
1
3
!