GRASS VALLEY K2 Lx0, Instruction Manual

Page: 47 / 56

July 31, 2008 K2 Lx0 RAID Instruction Manual 47
Adding expansion ports
To install additional expansion ports, follow these steps:
1. Remove the controller from the chassis. For information on how to remove the
controller, see “Replacing a RAID controller or expansion adapter” on page 43 .
2. Remove the cover by sliding it while pressing the lock, as indicated in following
diagram.
3. Remove the guard panel from the controller, as indicated in the following diagram.
4. Insert the expansion port by matching the connector locations. Confirm that it is
firmly inserted and there is no play in the expansion port.
5. Secure with screws at the expansion port spacers.
6. Replace the controller cover.
7. Return the controller to the chassis as described in “Installing a RAID controller or
expansion adapter” on page 44 .
HO
T
Lock
Connector
Guard
panel
Expansion port spacer
CONTROLLER
EXPANSION PORT