manualshive.com logo in svg

GRASS VALLEY Intuition XG, Configuration Manual, Page: 69 / 108

Share
Download
GRASS VALLEY Intuition XG Configuration Manual Download Page 69

5-8

Intuition XG Configuration Guide 

Dashboard - Intuition XG’s Local Configuration Software 

Device List

The Device List identifies the Vertigo devices that were found on the host machine (local) 
and/or on the network when a device discovery search is performed.

Depending upon which 

S

ETTINGS

 M

ODE

 is selected, Dashboard displays either the Device 

Profile page or the configuration pages for the selected device. 

The following table provides a description for each of the columns in the Device List and the 
topics listed below describe the tasks that you can perform using the Device List.
•

“Loading and refreshing the device list” on page 5-9

•

“Saving the device list” on page 5-9

•

“Restarting a device in the device list” on page 5-10

•

“Monitoring the status of a device” on page 5-10

•

“Removing a device from the device list” on page 5-10

O

UTPUT

 C

HANNEL

Displays the name of the output channel for the Vertigo device. Typically, this is 
A or B.

Note: If the device is a Vertigo software CG, this field always displays “SWCG” 
as the output channel.

A green or red light is displayed next to the output channel name, which 
indicates the state of the device.

The green light indicates that the device is active, connected to Dashboard, and 
ready to accept commands.

The red light indicates that the device is not active and no connection has been 
established by Dashboard. Therefore, you need to start the device and connect 
it to Dashboard through the host computer or the network. 

H

OST

 N

AME

Displays the name of the host computer.

IP

Displays the IP address of the device.

O

UTPUT

 R

ESOLUTION

Displays the setting of the output rendering resolution as specified on the 
device’s 

Device Profile page

 or the 

Resolution page

.

D

ESCRIPTION

Displays whether the device is a Software CG (Software-based rendering and 
preview application) or a hardware XG (hardware-based renderer and 
production device). Also, displays connection error messages (e.g. 

Failed to 

Open Socket

).

Summary of Contents for Intuition XG













































































































Reviews:

No comments