GRASS VALLEY INDIGO User Manual Download Page 45

Page: 45 / 174

INDIGO AV Mixer

User Manual

Overview of Control Features

LED Peak-Meters

The meters read the inputs assigned to the faders and display the channel

levels with three different colors:
•

Green

: from - to -6 dB

•

Yellow

: -6 dB to -2 dB

•

Red

: -2 dB to +10 dB

Faders

The faders adjust the input levels of the audio assigned to the

INDIGO AV

Mixer

channels within the range of - to +10 dB.

Use them to level the volumes of different audio sources.

Master Volume Button

The Master Volume Button lets you adjust the overall volume.

Headphones

The phones connectors output the Main out, Sub-Out or channel PFL

signal.
There are 2 phones connectors: one on the Control Panel and one on the

rear panel. They have the same source, but separate amplifiers.

5.1.8 Joystick

The Joystick in the upper right section of the

INDIGO AV Mixer

provides

easy positioning and sizing of keys (for example, positioning PIPs). On

Chromakey, the Joystick can be used to position the cursor for selecting the

color area to perform the key processing.

Summary of Contents for INDIGO















































































































































































Search results

Summary of Contents for INDIGO

Reviews:

Related manuals for INDIGO

Brands by name

Popular brands

GRASS VALLEY INDIGO, User Manual

Search results

Summary of Contents for INDIGO

Reviews:

Related manuals for INDIGO

Brands by name

Popular brands