GRASS VALLEY INDIGO User Manual Download Page 37

Page: 37 / 174

INDIGO AV Mixer

User Manual

Section

Basic Operation

5.1 Overview of Control Features

5.1.1 Control Panel

The

INDIGO AV Mixer

is operated by using the buttons, Digipots, lever

controls, and the graphical menu on the Touch Screen.

The buttons on the Control Panel are used during live operation for fast

and real time control. The menus, accessed via the Touch Screen, allow full

control and edit facilities and are mainly used to set up effects and for

system configuration.

The control features of the

INDIGO AV Mixer

are grouped by function-

ality into the following main sections:
• (1)

Touch Screen with Digipots

(see page 38)

• (2)

Delegation Subpanel

(see page 39)

• (3)

Crossbars for Bus and Source Selection

(see page 40)

• (4)

Main Transitions Subpanel with Transition Lever Arm

(see page 41)

• (5)

Numeric Input Subpanel

(see page 43)

• (6)

Audio Control Subpanel

(see page 44)

• (7)

Joystick

(see page 45)

Summary of Contents for INDIGO















































































































































































Search results

Summary of Contents for INDIGO

Reviews:

Related manuals for INDIGO

Brands by name

Popular brands

GRASS VALLEY INDIGO, User Manual

Search results

Summary of Contents for INDIGO

Reviews:

Related manuals for INDIGO

Brands by name

Popular brands