33
CopperHead 3050
User Guide
Mounting the Power Wafer Unit
This example illustrates the use of a camera with an Anton-Bauer battery mount system,
but your system may differ. This case illustrates a configuration where the camera is
powered through the Power Wafer option. The Power Wafer is powered through a Hybrid
fiber cable, which is powered from the CopperHead 3050 Base Station or MPS External
Power Supply.
Fig. 4-2: Mounting the Power Wafer Unit to the CopperHead 3050 Camera Unit
• The CopperHead 3050 Camera Unit is mounted to the camera as described
Mounting
the CopperHead 3050 Camera Unit to the Camera
on page 32.
• The Power Wafer (
3
) is attached to the CopperHead 3050 Camera Unit in place of the
battery. It is attached in the same manner as the camera battery.
• When the Power Wafer is securely mounted to the CopperHead 3050 Camera Unit you
must connect the supplied Power Wafer connector cable between the Power Wafer (
1
)
and the Power Wafer connector on the Camera Unit (
15
).
Fig. 4-3: Power Wafer to Camera Unit cable
PowerWafer for
use with
Powered Base
Station and
Hybrid cable
The Power Wafer to Camera Unit cable is
supplied with the CopperHead Power Wafer
Unit. For configuration please see
Connection
of the System
on page 35.
Summary of Contents for CopperHead 3050
