GRASS VALLEY CopperHead 3050, User Manual

Page: 27 / 93

21
CopperHead 3050
User Guide
CopperHead 3050 Base Station
The CopperHead 3050 Base Station is available with a number of options. The unit is
ordered with a specified Power Module, Audio/Intercom Module and Fiber Connector. For
an overall view of component location please see the overall diagrams in
Diagrams on
page 82.
CopperHead 3050 Base Station Front Panel
Fig. 3-11: CopperHead 3050 Base Station Front Panel
• A - Optical Connector (see Area A - Front Panel Optical Connector (Optional) on
page 21)
• B - Audio/Ethernet Indicators (see Area B - Audio Indicators on page 22)
• C - Video Indicators (see Area C - Video/Data Indicators on page 22)
• D - Signal Strength Indicators/Setup (see Area D - Signal Strength Indicators/Setup on
page 23)
• E - Status/Power Indicators (see Area E - Status/Power Indicators on page 23)
Area A - Front Panel Optical Connector (Optional)
Area A of the CopperHead 3050 Base Station provides for the optional mounting of the
Fiber Optical Connector on the front of the Base Station instead of the rear of the Base
Station.
For information on how to convert the Base Station from Rear to Front Fiber Connector, see
Connections between the Base Station and the Camera Unit on page 36.
Three types of Fiber Connectors are available for use with the CopperHead 3050 Base
Station. Typically one of these Fiber Connectors is pre-configured at the time of delivery.
Fig. 3-12: Fiber Connector Types
OpticalCON SMPTE 304M Molex and STs ST Connectors