23
CopperHead 3050
User Guide
Area D - Signal Strength Indicators/Setup
Fig. 3-15: Signal Strength Indicators/Setup
• 8- Signal Strength Readout in dBm:
this display changes between display modes
when selected.
• 9- Select Button:
chooses between three modes of operation.
• 10 - Readout Function Indicator:
•
BASE RX
– Optical Link signal strength received at Base Station from Camera Unit
•
CAM RX
– Optical Link signal strength received at Camera from Base Station
•
DIAG
– Digital display is in Diagnostic mode
For details on how the setup/Diagnostic functions operate, see
The CopperHead 3050
Camera Unit Digital Display
on page 58.
Area E - Status/Power Indicators
Hybrid Power Indicators are present only on a hybrid power unit
Fig. 3-16: Status/Power Indicators
•
11 - System Status Indicators
:
•
BASE POWER
- indicates the status of all power levels in the Base Station:
• Green when all power levels are normal
• Red when any power level is not normal
•
SYSTEM LOCK
- indicates that the Base Station is communicating with the Camera
Unit:
• Green when communicating with Camera Unit
• Red when it is not communicating with the Camera Unit
•
FIBER LINK
- indicates the optical power status of the Base Station and Camera
Unit:
Summary of Contents for CopperHead 3050
