30
JUPITER — Release Notes
Version 7.9.0
Note
Consult with your Network administrator if you do not know the network
values to enter.
•
If there is more than one Network card installed, all the cards will
appear in the dialog window.
•
Enter the Port information in the respective fields
11.
Enter the IP address for the Controller boards in the required field and
then click the
Next>
button.
Note
You must set the Subnet Mask and Gateway IP addresses to run the 7.9
version of Jupiter on the CM-4400. See
Setting the Subnet Mask and Gateway
for more information.
Using DHCP
If you are using DHCP, that is your IP address is not static, you will see
the following Question dialog (
Figure 22. Question Dialog
Note
It is strongly recommended that you use a Static IP address. Using DHCP
may cause configuration problems.
If you want to correct the IP address, click the
Yes
button. The Choose
Destination Location screen will then appear.
