Use Your Presenter System
CameraMan 3-CCD Presenter Camera System Installation and Operations Manual
35
Changes in the
Subject Position
within the video
frame also can be stored. These functions enable
the subject to fine-tune their position in each of the
autoTRACK Views.
For example, you may want to Zoom in slightly
closer on the
WIDE autoTRACK View
or adjust
your position in the video frame more to the left or
right. This provides you with the flexibility to custom-
ize each
autoTRACK View
to suit your needs.
The
autoTRACK Views
can be reset to accommo-
date these changes using the following procedures.
TIGHT AutoTRACK View
Press the
TIGHT autoTRACK View
button. The
video frame should show a close head shot of you.
This view is used to emphasize facial expressions. If
you would like to alter your image in this view, you
will need to reset the
Tight View
.
To SET or CHANGE the tight autoTRACK View:
1.
After pressing
TIGHT View
, use the
SUBJECT
POSITION
arrows to position yourself in the mid-
dle of the video frame.
2.
Use the manual
ZOOM
buttons to set the
needed Zoom perspective, if needed.
3.
Use the manual
FOCUS
buttons to set the focal
point, if needed.
4.
Use the manual
IMAGE
buttons to set the
needed light/dark contrast, if needed.
5.
Press and hold
TIGHT
until you hear two beeps
indicating the new setting is stored.
To RECALL the tight autoTRACK VIEW:
Press and release
TIGHT View
. The camera recalls
the information stored with the
TIGHT
button.
