Chapter 4
30 CameraMan 3-CCD Presenter Camera System Installation and Operations
4.
Press one of the four
autoTRACK View
buttons
on the keypad to activate the autoTRACK func-
tionality of the Camera System (the camera will
not track until one of the autoTRACK buttons is
pressed). Once you are in autoTRACK mode,
the
autoTRACK
LED on the camera’s display
panel will illuminate.
If the
autoTRACK
LED on the CameraMan’s dis-
play panel is blinking, CameraMan is in autoTRACK
mode, but the link between CameraMan and the
Tracking Ring is not active.
To establish this link, move into the CameraMan’s
field-of-view (see the
autoTRACK MODE
or
Trou-
bleshooting
sections of this manual for further assis-
tance).
Rechargeable Battery
The Tracking Ring Power Pack comes with a built-in
12-hour Rechargeable Battery. When the battery is
running low, the
Battery LOW
LED on the top of the
Tracking Ring Power Pack illuminates. At this time
the Tracking Power Pack should be recharged or an
Auxiliary Battery Pack should be attached to the
Tracking Ring Power Pack.
To recharge the battery:
1.
Turn
OFF
the Tracking Ring Power Pack.
2.
Set the switch on the front of the Battery Charger
to
TRACKING POWER PACK
.
3.
Plug the Battery Charger into an electrical outlet
and connect it to the Power Pack.
The Battery Charger takes two to three hours to
recharge the Tracking Ring Power Pack.
