manualshive.com logo in svg

GRAS 45CA-1, Instruction Manual, Page: 37 / 58

Share
Download
GRAS 45CA-1 Instruction Manual Download Page 37

     G.R.A.S. SOUND & VIBRATION

  3

45CA  Headphone/Hearing-Protector Test Fixture 

CONTENTS

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.1  About this Appendix   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.2  The Test Fixture   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2 Components   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3 

Basic Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

4 

45CA-1 and 45CA-2 with 1” and 1/2” Microphones . . . . . . . . . . . . . . . . . . . . . 7

4.1  Assembling Microphone and Preamplifier

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

4.2 Calibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

4.3  Mounting the Microphone Assembly into the Test Fixture. . . . . . . . . . . . . . . . . . . . 7

4.4  Acoustic Isolation Testing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

5 

45CA-3 and 45CA-4 with IEC 60318-1 Ear Simulator RA0039   . . . . . . . . . . . 13

5.1  Ear Simulator / Preamplifier Assembly

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

5.2 Calibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

5.3  Completing the Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

5.4  Mounting the Ear Simulator Assembly into Test Fixture  . . . . . . . . . . . . . . . . . . . . 15

6 

45CA-5 and 45CA-6 with IEC 60318-4 Ear Simulator 

 

45CA-7 to 45CA-10 with Anthropometric Pinna  . . . . . . . . . . . . . . . . . . . . . . 18

6A.1  Assembling Ear Simulator and Preamplifier

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

6B.1  Assembling Ear Simulator and Preamplifier

  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

6.2  Mounting the Ear Simulator Assembly into the Test Fixture  . . . . . . . . . . . . . . . . . 20

6.3 Calibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

6.4  Mounting the KEMAR Pinna  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Summary of Contents for 45CA-1



























































Reviews:

No comments