3
About This Manual
This manual explains how to set up and operate the cutting plotter ( the "plotter") by using the Cutting
Plotter controller (the "controller") from a computer.
For information on setting up the plotter and installing the software, see "Setup Manual".
For information on operations from the control panel of the plotter, see "User's Manual".
* Chapter 2 and Chapter 4 through Chapter 9 in this manual describe the operations and settings that can
be done from the menu screen that is shown by pressing the [CONDITION] key or the [MENU] key on the
operation panel of the plotter. These chapter titles are followed by the corresponding plotter key or menu
item names so that you can easily refer to "User's Manual".
