1 2
2 . S e t t i n g To o l C o n d i t i o n s [ C O N D I T I O N ]
1
Media Name
Displays the name of the tool condition that is currently selected. To
save a tool condition as a new one, enter a new fi le name here.
¨
Media Name (page 16)
2
Tool
Specify the part no. of the cutter blade, or the pen.
3
Force
Set the force of the cutter or the pen.
Setting range
1 ~ 48
4
Speed
Set the move speed of the tool.
Setting range
1 to 105 cm/sec.
5
Accel
Set the acceleration of the tool.
Setting range
1 ~ 8
6
Offset
Fine-adjust the difference between the tip of the blade and the center of
the plunger. Set this value based on the type of the cutter blade that you
use.
¨
What is Offset (page 12)
¨
Guideline of Offset Setting (for Each Cutter Blade) (page 12)
7
About the blades
Displays detailed information on the cutter blade and the plunger of the
tool that is currently selected.
8
Advanced
Displays advanced setting items.
¨
Advanced Control of Tool Behavior (page 13)
9
OK
Saves the set content as the current media name and closes the tool
condition setting screen. To newly save it, enter the optional fi le name
into media name.
10
Cancel
Cancels the settings and closes the tool condition setting screen.
Guideline for Settings (When Plotter Pen is Selected)
Pen type
Part no.
Force
Speed
(cm/sec.)
Acceleration
Water-based fi ber-tip pen
KF7000 Series
10 ~ 12
30
4
Oil-based ballpoint pen
KB700-BK
25 ~ 28
60
4
Guideline for Settings
Refer to the Cutter Blade Manual.
Guideline of Offset Setting
Refer to the Cutter Blade Manual.
What is Offset
It will adjust the difference between the tip of the blade in the plunger
and the center of the plunger. There are standard adjustment values
for each cutter blades. Fine adjustment will be made to that standard
values here. (Adjustment will be made with standard value as 0.)
For the Pouncing, specify the distance (length) of 1 to 99mm, which
allows the tool to go down.
